SaM - 2 Wires Measurement with Wire Resisitances

What happens if we were to consider the wire resistances $R_{W1}$ and $R_{W2}$ attached to the sensor, with a current supply: So we would measure not just the resitance value of our sensor $\left[R(T)\right]$ but instead we would get:$R_{\text{MEASURED}}=R(T)+R_{W1}+R_{W2}$ Also note that usually the reisistance of the cables will also change due to temperature, this results into a variable offset, not good. To solve this problem we can use a 4 wire measurement system.